-Home -Planes -Brushless Motors -Brushless ESC -Ducted Fans -Radio Systems -Receivers -Gearboxes
-Props -Servos -Wheels/L.Gear -Brushed ESC -Batteries -tools & Accessories -Laser Cut Parts -Combo's

 

 

  GWS floats can be adapted for several different planes, but the E-starter comes equipped with both of the float strut inserts.

 

$10.50 in stock

 

 

 

 

GW-RG-MM                             We are using these in the GWS warbirds with 1 1/2" wheels

RETRACTABLE MICRO LANDING GEAR

<SPECIFICATION>

BODY : 28.0x10.6x10.5 (mm)  1.10x0.42x0.41 (in)

WEIGHT : 2.9g  (0.1oz)

WIRE : ∮2.0x150 (mm) ∮0.0.8x5.91 (in)

<TOTAL WEIGHT>

STD : 6.50g  (0.23 oz)

Light : 3.82g (0.13 oz)

Xtra-Light : 3.65g (0.13 oz)

** O/W WHEEL Weight**

<REQUIRED>

SERVO  : GWS MICRO SERIES

WHEEL : GW/LFW-508/21 (2"SCALE WHEEL)

                 GW/WH01/85 & GW/WH01/76

$10.00 

 

 

GW-RG-PM    

RETRACT GEAR, PICO MAIN

 

SPECIFICATION:

BODY:

  • 22.5X7.0X4.5(mm)

  • 0.89X0.28X0.18 (in)

  • 0.98g (0.03oz)

WIRE:

  • ∮1.6x150 (mm)

  • ∮0.06x5.91(in)

  • 2.4g (0.08oz)

TOTAL WEIGHT (1 pcs) :

  • 3.5 g (0.12oz)

 

 

SERVO REQUIRED:

  • GWS PICO+

  • GWS NARO series

(Use a servo that has 1kg-cm or more torque to operate the retract gears properly. Thus NARO STD servo is not recommended)

 

PART LIST:

  • RG-PM x 2 pcs.

  • Screw x 8

  • Instruction Manual x 1 pce.

REMARKS:

When the retract gears are at down position (fully open/90 degrees down), the arms of the gears are at anchor situation geometrically. This design will not allow any accidental retraction during landing and taxing and avoid possible damage to aircraft and retract gears.

Install the servo and the retract gears firmly, and make proper linkage as per the drawing shown in order to avoid any error of operation.
 

    $ 7.50 

 

Light Weight foam tire
 
ITEM Diameter of Wheel (mm) Weight(g) Landing Gear Dimension(mm) tota ply(mm)
GW/LFW-254/13 26 0.6 1.3 5.6
GW/LFW-381/15 38 1.6 1.5 8
GW/LFW-508/21 51 3.2 2.1 10

26mm $1.50  

38mm $2.00

51mm $2.50 

SCALE WHEELS

 

ITEM Diameter of Wheel (mm) Weight(g) Landing Gear Dimension(mm) tota ply(mm)
GW/SCW-159/13 15 0.5 1.3 3.5
GW/SCW-254/13 26 2.9 1.5 5.6
         

15mm each                  26mm each

  $1.95    $2.45

These wheels are foam with a plastic hub and come in four sizes. Package of two

1.25"  $2.00 

1.50"  $2.50 

2.00"  $3.00           

                                   2.50"  $3.50 

 

  These are the wheels we are using for the retracts on the warbirds. Thin and light.  Sold in pairs

  1.5"  $ 3.00 

 

  These are the wheels we are using on the PT-17 and TM-400.  a bit wider and great for biplanes.  Sold in pairs

  1.75"  $4.50 

 

  These are the wheels we are using for the Scorpio retract sets.  Can handle the weight no problem.  Sold in pairs.

  2.0"